Category - compliance

Dodd-Frank Act Section 1502: Conflict Minerals & SEC Reporting Requirements

The Dodd-Frank Act may have been signed in 2010, but Section 1502 on conflict minerals remains a critical compliance challenge for manufacturers...

Conflict Minerals Explained: Understanding 3TG and Their Compliance Impact

Conflict minerals – tin, tungsten, tantalum, and gold (3TG) – are essential raw materials in countless modern products, from smartphones to cars and...

EU Conflict Minerals Regulation: A Compliance Imperative for Global Supply Chains

Armed conflicts and human rights abuses linked to mineral sourcing have long raised red flags. With the EU Conflict Minerals Regulation in force,...

REACH Regulation & Reporting: Navigating EU Chemicals Compliance with Confidence

A single screw coated with a restricted substance can trigger penalties across 30 countries – that’s today’s reality for manufacturers. Since 2007...

CSRD & Scope 3: Why Value Chain Emissions Demand a Closer Look

Understanding Scope 3 emissions is no longer optional – it’s a regulatory imperative. Under the Corporate Sustainability Reporting Directive (CSRD),...

Responsible Minerals: Sourcing Policy and Use in Global Supply Chains

If you manage supply chain compliance, you know the landscape has dramatically shifted. What began as conflict minerals reporting focused on 3TG...

Navigating Automotive Regulatory Compliance in a Complex Industry

In today’s automotive industry, compliance is a strategic necessity. From hazardous substance restrictions to end-of-life vehicle directives,...

CSRD & Omnibus Proposal 2025: Key Changes, New Timeline & Impact for Your Business

On February 26, 2025, the European Commission published the long-anticipated Simplification Omnibus proposal. This legislative package forms part of...

Combining Product Compliance & Sustainability: A Must for Modern Businesses

Businesses today are no longer grappling with just product compliance or sustainability in isolation. These two dimensions are converging, driven by...

Unlocking Environmental Excellence: Substances and Materials

Materials and substances are the foundational elements used to create larger components and complete products like smartphones, vehicles, and medical...

Navigating New Regulatory Waters: The Imperative of Balancing Human Expertise and Technological Innovation

As sustainability transitions from being a goal to an essential requirement in the automotive industry, grasping the current trends is vital. Our...

Shifting Gears for a Sustainable Future: A Financial Commitment to Compliance and Eco-Friendly Practices

Our annual Automotive Trend Survey captures the insights of compliance and sustainability experts from across the industry and reveals four key...

Prioritizing a Green Future: Sustainability Surpasses Compliance

In an era where sustainability is not just a goal but is becoming a mandate for the automotive industry, understanding the landscape is vital....

Over 50% See Growing Interest in Sustainability

The automotive sector is undergoing a significant transformation, with sustainability taking center stage. The latest iPoint Automotive Compliance &...

PFAS Regulation in the EU: From POP to REACH

Per- and polyfluoroalkyl substances (PFAS) have gained global attention due to their widespread use and potential effects on human health and the...

Powering the Future: Sustainability in the Electronics Industry

In an era where electronic devices seamlessly integrate into every facet of our daily lives, the demand for sustainability in the global electronics...

EPA's New PFAS Reporting Rule Under TSCA - Covered by our Latest Rule Group

In the rapidly evolving landscape of environmental regulation, the challenge of managing Per- and Polyfluoroalkyl Substances (PFAS) has become a...

Understanding PFAS: Regulations & Relevance for Companies

PFAS, or Per- and Polyfluoroalkyl Substances, have become a significant global concern due to their prevalence and potential health and environmental...

Breathing Life into Compliance

In the dynamic world of industrial production, compliance and regulatory conformity are crucial. On the one hand, they enable access to different...

CSRD – Well Prepared Thanks to Data-Driven Intelligence

Sustainability in Discrete Manufacturing: Capture, Analyse, Report and Optimise. Is sustainability the new compliance? The intent behind the European...

Surprising survey results on compliance and sustainability in the automotive industry

The iPoint Compliance & Sustainability Trend Survey is one of the world's largest surveys offering insights into sustainability and compliance. Of a...

A "Paper Tiger" gets its Teeth

The EU is getting tough: CSRD. The EU is to become climate-neutral by 2050 - to achieve this goal, the "toothless paper tiger NFRD (Non Financial...

Sustainable products are the future: in sales, compliance, and production.

Sustainability is becoming increasingly important in production in the manufacturing industry and is already a key factor for many manufacturers. The...

The iPoint Sustainability and Compliance Trends Survey 2022

Surprisingly, companies worldwide, especially in Asia, increasingly view sustainability and compliance as important factors in their business...

Drive business value by data analysis – iPoint CARE

Data analysis for product compliance and sustainability, like Life Cycle Assessment or Product Carbon Footprints, provide your company with a crucial...

The Digital Product Passport – a prerequisite for a Circular Economy

The concept of the circular economy is gaining more and more prominence on the agendas of policymakers and industry alike. This is evidenced, e.g.,...

Collect Data for Compliance and Sustainability – iPoint CARE

Data collection is the first step on the road to successful product compliance and sustainability in order to obtain type approval and bring a...

Sustainability and Compliance Trends Study

The world’s largest sustainability and compliance trends survey entered its fourth round, with over 1000 responses received from experts across the...

The Sustainable Finance Disclosure Regulation: A Spotlight on Finance

A conversation between Joerg Walden of iPoint and Juan Ibañez and Dr. Chris Bayer of Development International e.V.

Sustainability and Compliance Trends 2020 With a Focus on the Automotive Industry

The pandemic crisis heavily influenced the year 2020, which likely also impacted iPoint’s Trends Study 2020. However, in addition to the sudden...

Discover the iPoint Suite

The iPoint Suite offers solutions for the entire product life cycle – from design to production and use to recycling and reuse.

Duty of Care Also in Germany: The Impending Mandatory Due Diligence Legislation

At the beginning of March, German ministries published the government draft of a mandatory supply chain due diligence law...

ECHA SCIP Database Explained: From REACH to WFD

The ECHA SCIP database increases transparency on hazardous substances in products. Under the EU Waste Framework Directive SCIP rules and in line with...

Digitalization and collaboration – A look into the Future

More than 65% of consumers are worried about climate change, and take social and environmental impacts of products into consideration when making...

I care, you care, we care: The iPoint CARE principle

Many of our customers say that we’ve simplified the complex processes of digitalizing the lifecycles of products, materials, and supply chain...

New IUCLID version by ECHA

ECHA will release the new version of IUCLID (https://iuclid6.echa.europa.eu/) on October 28th. With that the release of version 1.0 of the SCIP...

SCIP reporting using IMDS system vs. iPoint SCIP connector

We are all aware that SCIP reporting requires a considerable effort for almost all affected companies. Thus, every form of facilitation is helpful,...

From Compliance to Sustainability – The iPoint Suite

iPoint’s software covers a lot of ground. In combination, our software products provide a broad spectrum of compliance, sustainability, and risk...

Data – the raw material required for good decision making in the transition to a Circular Economy

Properly utilized data is a valuable resource. In our increasingly digital world, most efficiency gains, reductions in cost, increases in speed, and...

Expanding compliance processes and tools to better manage sustainability

Many companies voluntarily go beyond regulatory requirements, setting higher expectations and standards supporting sustainability initiatives. Many...

End-to-end material lifecycle management is key

When it comes to materials in products, what we call “end of life” is also the “beginning-of-life”. This idea isn’t new, but only around 20 years ago...

How does Brexit affect you?

The planned transitional period will run until 31 December 2020. After the end of the transition period, EU legislation will no longer apply directly...

A Natural Path to Managing Material Lifecycles

Meeting all local and global regulatory requirements is a must for all companies doing business in the 21st century. Consequently, a robust material...

The current state of material compliance management

Materials and substances used in manufacturing plants need to comply with health, safety, and environmental regulations surveilled by authorities...

We are living in a material world

Materials and substances are the fundamental building blocks required to produce bigger components, then large assemblies, and finally complete...

Cobalt unmasked – Is cobalt really a sustainable option?

In recent years, the demand for cobalt has steadily increased with the development of the electric vehicle market and the digitalized industry. But...

ECHA Updates SVHC Candidate List: 4 New Substances

On June 25, ECHA added four new candidates to the list of substances of very high concern. iPoint’s systems reacted immediately to the new entries...

Compliance Reporting for Electronics – new challenges driven by the Automotive industry and the EU SCIP database

Chemical compliance reporting for electronics or products with electronics in them involves providing detailed substance and materials information...

The new EU Regulation of Medical Devices – MDR

Is your company and your supply chain ready to tackle the new EU MDR requirements? Get prepared for the 7 major changes in Medical Device Regulation.

How The Automotive Sector Can Do MedTech

Due to COVID-19, protective masks and respiratory equipment are in high demand. iPoint Compliance can support the automotive sector in achieving...

Homeland Security and Your Supply Chain

The US Dept. of Homeland Security is committed to enforcing anti-human trafficking and forced labor laws. What does their new ‘Strategy’ document...

Can Digitalization help to save costs related to Sustainability & Compliance?

The Sustainability and Compliance Trends Survey 2019 is one of the largest global surveys on Compliance and Sustainability in various industries. The...

The Cost of Compliance & Sustainability – How companies’ spending evolved in 2019

The Sustainability and Compliance Trends Survey 2019 is one of the largest global surveys on Compliance and Sustainability in various industries....

Medical Device Industry – Trends in 2020

Several global companies from the Medical Device industry like Becton Dickinson, Roche, Emerson or Zimmer Biomet are longterm customers of iPoint and...

Going Beyond IMDS with iPoint Approval

The race to introduce a product to the market is a fierce one; where companies are constantly trying to shorten the product cycle. One of the items...

Enterprise Blockchain 2028

Gartner: Corporate Blockchain Won’t Take Off for Another Decade Hype comes with a placebo effect, and this effect is real. It makes people do...

How Toyota North America ensures the compliance of its products

When Toyota North America decided for iPoint Compliance as the leading solution to manage all their IMDS activities inhouse it took only nine months...

How to collect information from your supply chain – Where an industry standard does not exist!

When it comes to collecting information from your supply chain, having certain industry standards, such as the Conflict Minerals Reporting Template...

Why we built the iPoint Suite

In iPoint’s software solutions, the CARE principle forms the foundation. All our software solutions collect, analyze, report and help companies to...

How digitalization and knowledge creates transparency for businesses

We believe in continuous progression with technology. This can be accomplished by making complexity manageable with the digitalization of Life Cycles...

Why increasing market dynamics lead to complexity

Today’s companies face high pressure by investors to improve revenue, by regulations to abide by the new rules and by competitors to be ever...

Identify risks and achieve anti-human trafficking compliance with eLRT Lite

On Thursday, August 8th, eLRT Lite, a simplified version of the electronic Labour Rights Template, was launched. Pia Ostroske (P.O.) interviewed...

Cobalt Reporting via the iPoint SustainHub

Cobalt is the key element used in batteries of mobile phones, laptops, and electric vehicles and hence the demand for cobalt has been increasing year...

4 new substances added to the Candidate List of substances of very high concern (SVHC) and important changes in the near future

On July 16, 2019, the European Chemical Agency (ECHA) has published 4 new candidate substances. This candidate list that contains the so called SVHC...

How to increase Business Transparency by assessing compliance data – exactly where its needed